Pepperl+Fuchs
AS-i
VBA-4E-KE-ZEJQ
| Node type | A/B node |
|---|---|
| AS-Interface specification | V3.0 |
| Required gateway specification | ≥ V2.0 |
| UL File Number | E223772 |
| LED FAULT | Fault display; kırmızı LED · kırmızı: Communication fault or address is 0 · kırmızı, flashing: Overload, internal input supply |
AS-Interface sensor/actuator module
- Gövde with removable and Renk coded terminals
- Communication monitoring
- Inputs for 2- and 3 telli sensors
- Addressing jack
- Selectable supply to the sensors: External or from the module
- Function display for bus, internal sensor supply, and inputs
- A/B node with extended addressing possibility for en fazla 62 nodes
KE switch cabinet module, 4 inputs (PNP)
VBA-4E-KE-ZEJQ
| Node type | A/B node |
|---|---|
| AS-Interface specification | V3.0 |
| Required gateway specification | ≥ V2.0 |
| UL File Number | E223772 |
| LED FAULT | Fault display; kırmızı LED · kırmızı: Communication fault or address is 0 · kırmızı, flashing: Overload, internal input supply |
| LED INT | Internal input supply active; LED yeşil |
| LED PWR | AS-Interface voltage; yeşil LED · yeşil: voltage OK · flashing yeşil: address 0 |
| LED IN | switching state (input); 4 LED sarı |
| Auxiliary voltage (input) | 12 ... 30 V DC PELV |
| Rated Çalışma gerilimi | 26.5 ... 31.6 V from AS-Interface |
| Rated Çalışma akımı | ≤ 30 m A (without sensors) / max. 180 m A |
| Protection class | III |
| Surge protection | UEXT, Ue: Over voltage category III, safe isolated power supplies (PELV) |
| Number/Type | 4 inputs for 2- or 3 telli sensors (PNP), DC |
| Supply | from AS-Interface (switch position INT, default settings) or external UEXT (switch position EXT) |
| Voltage | 21 ... 31 V DC (INT) |
| Current loading capacity | ≤ 150 m A, overload- and kısa devre korumalı (INT) |
| Input current | ≤ 9 m A (limited internally) |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| 0 (unattenuated) | ≤ 3 m A |
| 1 (attenuated) | ≥ 5 m A |
| Signal delay | < 1 ms (input/AS-Interface) |
| Directive 2014/30/EU | EN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007 |
| Koruma sınıfı | EN 60529:2000 |
| Fieldbus standard | EN 62026-2:2013 |
| Input | EN 61131-2:2004 |
| Emitted interference | EN 61000-6-4:2007 |
| AS-Interface | EN 62026-2:2013 |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| Profile | S-0.A.0 |
| IO code | 0 |
| ID code | A |
| ID1 code | 7 |
| ID2 code | 0 |
| Data bits (function via AS-Interface) | Input Output |
| D0 | IN1 |
| D1 | IN2 |
| D2 | IN3 |
| D3 | IN4 |
| Parameter bits (programmable via AS-i) | function |
| P0 | not used |
| P1 | Input filter · P1 = 0 input filter on, pulse suppression ≤ 2 ms · P1 = 1 input filter off (default settings) |
| P2 | Synchronous mode · P2 = 0 synchronous mode on · P2 = 1 synchronous mode off (default settings) |
| P3 | not used |
| Ortam sıcaklığı | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Relative humidity | 85 % , non-condensing |
| Climatic conditions | For indoor use only |
| Altitude | ≤ 2000 m above MSL |
| Pollution degree | 2 |
| Bağlantı | removable terminals · rated Bağlantı capacity: · rigid/flexible (with and without wire-end ferrules): 0.25 mm2 ... 2.5 mm2 · for multiple-wire Bağlantı with two wires of equal cross-section: · flexible with twin wire-end ferrules: 0.5 mm2 ... 1.5 mm2 |
| Gövde | PA 66-FR |
| Ağırlık | 150 g |
| Yükseklik | 99 mm |
| Genişlik | 22.5 mm |
| Uzunluk | 102 mm |
| Mounting | DIN mounting rail |
| Sıkma torku of clamping screws | 0.5 Nm ... 0.6 Nm |
Doküman henüz eklenmedi.
Bu ürün için stok, termin ve teknik destek bilgisi almak üzere bizimle iletişime geçin.
Adres
Arıkanlar Rota İş Merkezi Yuvaköy Küme Evleri No:31 İç Kapı No:56 Yenimahalle / ANKARA
Telefon
+90 531 699 30 30
E-posta
info@prosenstr.com