Pepperl+Fuchs
Fabrika Otomasyonu
IQT1-18GM-R4-V1
| Operating frequency | 13.56 MHz |
|---|---|
| Transfer rate | 26 k Bit/s |
| Read distance | 0 ... 50 mm |
| Write distance | 0 ... 50 mm |
| Genişlik | max. 45 mm |
RFID read/write device
- Operating frequency 13.56 MHz
- Conforms to ISO 15693
- Suitable for FRAM transponder
- Read/write head with thread M18 x 1
- Bağlantı via V1 (M12 x 1) plug Bağlantı
- Multihole-LED for function display
- Koruma sınıfı IP67
- Bağlantı via integrated RS-485 interface
HF RFID read/write device, ISO 15693
IQT1-18GM-R4-V1
| Operating frequency | 13.56 MHz |
|---|---|
| Transfer rate | 26 k Bit/s |
| Read distance | 0 ... 50 mm |
| Write distance | 0 ... 50 mm |
| Genişlik | max. 45 mm |
| UL File Number | E87056 |
| MTBF | 375 a (Operation at +40 °C) |
| LED yeşil/sarı | Multihole-LED: · yeşil: power on · yeşil flashing: read/write attempt performed · sarı: data carrier detected |
| Rated Çalışma gerilimi | 10 ... 30 V DC , ripple 10 %SS , limited power source (EN 60950) |
| Power consumption | ≤ 1.2 W |
| Physical | RS-485 point-to-point Bağlantı |
| Protocol | ASCII |
| Kablo uzunluğu | ≤ 3 m |
| Directive 2014/53/EU | EN 301489-1 · EN 301489-3 · EN 300330 · EN 62368-1 · EN 50364 |
| Directive 2011/65/EU (Ro HS) | IEC/EN 63000 |
| Koruma sınıfı | EN 60529 |
| RFID | ISO/IEC 15693-2 · ISO/IEC 15693-3 · ISO/IEC 18000-3 |
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: · (1) This device may not cause harmful interference, and · (2) This device must accept any interference received, including interference that may cause undesired operation. · Caution: · Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
| IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: · (1) this device may not cause interference, and · (2) this device must accept any interference, including interference that may cause undesired operation of the device. · · Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : · (1) l'appareil ne doit pas produire de brouillage, et · (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. |
| Ortam sıcaklığı | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Bağlantı | connector M12 x 1 |
| Gövde | PBT/stainless steel |
| Encapsulation compound | CY 221/HY 2966 |
| Montaj | gömme olmayan |
| Distance between two heads | ≥ 80 mm |
| Ağırlık | yak. 40 g |
| Uzunluk | 66 mm |
| çap | 18 mm |
Doküman henüz eklenmedi.
Bu ürün için stok, termin ve teknik destek bilgisi almak üzere bizimle iletişime geçin.
Adres
Arıkanlar Rota İş Merkezi Yuvaköy Küme Evleri No:31 İç Kapı No:56 Yenimahalle / ANKARA
Telefon
+90 531 699 30 30
E-posta
info@prosenstr.com